История страницы

If it is necessary to run the robot in automatic mode, according to a schedule, you will need to set up a schedule for running the robot. To view and configure the local robot launch schedule, select the desired robot and click Schedule settings.

Image Modified

A window opens in which you can edit the start schedule, restart the robot, frequency and other startup parameters:

Image Removed

На вкладке "Расписание запуска" пользователь может просмотреть настройки локального расписания роботов. 

Image Added

• Для добавления нового расписания для запуска необходимо нажать на кнопку  Image Added
• Для отключения расписания необходимо передвинуть бегунок  Image Added
• Для редактирования расписания необходимо нажать кнопку  Image Added
• Для удаления расписания необходимо нажать кнопку  Image Added
• Для обновления сделанных изменений необходимо нажать на кнопку  Image Added
• Для запуска планировщика задач Windows необходимо нажать на кнопку   Image Added

При редактировании расписания открывается окно:

Image Added

В окне пользователь может редактировать расписание запуска робота, перезапуска, периодичности запуска.

To activate the settings sections, move the corresponding slider to the state «Enabled», configure the necessary parameters. To finish, click «Refresh».

Image Added

Description of the schedule settings sections

The «Run» section

It is intended for setting the date and time of the robot launch. To configure the option «Run» (date and time of launch), you need to click on the button, and then use the «Calendar» to select the date and time of the robot launch.

Image Modified

The «Restart» section

Designed to adjust the interval and the number of repeated restarts of the robot. To configure the option «Restart» it is necessary to switch the switch to the «On» mode, set the repetition interval, if necessary, switch the «Repeat during» switch to the «On» mode and set the number of repetitions in the time interval.

Image Modified

The «Frequency» section

It is designed to adjust the frequency of the robot launch (weekly, monthly, daily). To configure the option «Frequency», you need to switch the switch to «On» mode, and then select the launch frequency – daily, weekly (then you need to select the day of the week) or monthly (then you need to select the day of the month).

Image Modified

The «Run before» section

It is intended for setting the date and time before which the robot needs to be launched. To configure the option «Run before» it is necessary to switch the switch to the «On» mode, and then click on the calendar button and set the date and time before which you need to start the robot.

Image Modified

The «Additional» section

The section settings are used to select a rule when performing a task. The functionality for choosing a rule is similar to this functionality in the task scheduler. Rules are available:

...

By default, the value is set to «Don’t start a new instance».

Image Modified

Section «Run Parameters»

It is intended for setting the logging level and specifying input data for the robot, if they are required for its operation.

...

The requirement to install input data can be set in the Technical Specification for the configuration and implementation of this software robot. If so, follow these requirements, enter the data in the «Data» window before starting the robot.

Image Modified

To update the robot launch schedule, click on the «Refresh» button, to cancel the created schedule, click on the «Cancel» button.

...