История страницы
Available in the section:
В разделе доступны:
Якорь Список роботов Список роботов
Список роботов | |
Список роботов |
...
List of robots
Описание таблицы роботов
Таблица на странице содержит список готовых роботов, которые опубликованы в удаленное хранилище платформы. При этом отображаются только те роботы, к которым у вас настроен доступ. Подробнее в разделе Access control.
...
Название столбца/кнопки
...
Описание
...
Отображается название робота
...
Кнопка "Описание робота"
...
Кнопка расположена в столбце "Робот" у всех роботов
По нажатию открывается окно, в котором указано название робота и его описание:
Т.к. описание относится к роботу в целом, а не к конкретной его версии, кнопка есть только в строке, где есть название робота:
...
В каждой строке отображается конкретная версия робота. Если у робота несколько версий, то каждая из них расположена на отдельной строке в таблице. При этом все версии всегда отображаются в порядке их публикации - от самой новой к самой старой снизу/вверх:
Список версий можно сворачивать или разворачивать по кнопке или . Если у робота только одна версия, то эта кнопка отсутствует
Рядом с версией есть индикатор, отображающий необходимость наличия графического интерфейса на учетной записи машины для работы этой версии робота. Если отображается , значит, графический интерфейс нужен, если не нужен
...
Отображается описание изменений, которые были сделаны в конкретной версии робота
Описание изменений в версии робота пользователь заполняет в окне публикации робота в ROBIN Studio при публикации в базу Оркестратора
...
Если версию робота запускали менее 2-х раз в столбце указано "Нет данных"
Если эту версию робота запускали 2 и более раз, в столбце указано среднее время работы этой версии робота, которое Оркестратора автоматически рассчитал на основе длительности выполнения ранее совершенных запусков
...
Отображается дата и время, когда версия робота была опубликована
...
Кнопка "Запустить"
...
По нажатию открывается окно "Запуск робота". Подробнее о данном окне описано ниже
...
Кнопка "Обновить"
...
По нажатию происходит обновление записей в таблице
Description of the robot table
The table on the page contains a list of ready robots that are published to the platform's remote storage. Only those robots to which you have configured access are displayed. For more information, see the section Access control.
Column name / button name | Description |
---|---|
"Robot" column | The name of the robot is displayed |
"Robot description" button | The button is located in the "Robot" column of all robots The button opens a window with the robot's name and description: The user fills in the robot description in the "Specification" window in ROBIN Studio before publishing the robot Since the description refers to the robot as a whole and not to a specific version of the robot, there is a button only in the line with the robot name: |
"Version" column | Each row displays a specific version of the robot. If the robot has several versions, each of them is located on a separate row in the table. At the same time, all versions are always displayed in the order of their publication - from the newest to the oldest from bottom/top: The list of versions can be minimized or maximized using the or button. If the robot has only one version, this button is not available Next to the version, there is an indicator that shows whether the host account needs a GUI to run this version of the robot. If is displayed , it means that the GUI is required, if |
"Changes" column | Displays a description of the changes that have been made to a particular version of the robot The user fills in the description of changes to the robot version in the robot publishing window in ROBIN Studio when publishing to the Orchestrator database |
"Average time" column | If the robot version has been run less than 2 times, the column indicates "No data" If this version of the robot has been run 2 or more times, the column shows the average run time for this version of the robot, which Orchestrator automatically calculated based on the run times of previous runs |
"Author" column | The name of the user who published the robot version. Different versions of the same robot can have different authors |
"Date of publication" column | Displays the date and time when the robot version was published |
"Start" button | The “Start robot” window opens as soon as you click More details about this window are described below |
"Update" button | The records in the table are updated as soon as you click on it |
Use the “Columns” dropdown list to select which columns will be hidden or displayed, with the “Robot” and “Version” columns always displayedС помощью выпадающего списка "Столбцы" можно выбрать, какие столбцы будут скрыты или отображены, при этом столбцы "Робот" и "Версия" отображаются всегда.
Якорь Запуск робота вручную Запуск робота вручную
Запуск робота вручную | |
Запуск робота вручную |
...
Manual robot start
To launch the robot you need:
- Choose the robot version that is need to change in the table.
- Click the "Start" button in the line with the desired robot version.
- Fill in the fields in the “Launching robot” window that opens.
- Click the “Start” button. Or click the “Cancel” button if you decide not to run the robot.
"Launching robot" window description
Button name / field name | Description |
---|---|
Robot name | Name of the robot, one version of which will be launched |
"Version" field | A dropdown list showing all versions of the robot that have been published to the Orchestrator database Next to the version, there is an indicator that shows whether the host account needs a GUI to run this version of the robot. If s displayed , it means that the GUI is required, if |
"Logging level" field | A dropdown list that displays the possible options for the logging levels of the workflow that the robot will execute Default value: “Business” Available values:
|
"Host" field | A dropdown list that displays the names and IP addresses of hosts for which there is data in the platform database. Only hosts to which you have configured access are displayed (see Access control section for more details) |
"Account" field | A dropdown list of accounts:
To be able to edit the current field, the host in the “Host” field must be selected |
Block with fields “Setting the input parameters of the robot” | If the selected robot version has input parameters, the window will display a subsection “Customizing robot input parameters” with fields to fill in these parameters:
The number of fields is equal to the number of input variables specified in the robot. The name of each such field corresponds to the name of the variables. Next to the field there is a hint about the field's data type If the robot has parameters with any other data type than these 3, they will not be displayed The presence of the warning does not prevent the robot from running or displaying fields of type “String”, “Number” and/or “Boolean”. |
“Cancel” button | When clicked, a window appears confirming that the start is canceled: |
"Start" button | If all mandatory fields are filled in, the workflow of the robot starts when you click on it |
...
Для запуска робота необходимо:
- Выбрать в таблице версию робота, которую нужно запустить.
- Нажать на кнопку "Запустить" в строке с нужной версией робота.
- Заполнить поля в открывшемся окне "Запуск робота".
- Нажать на кнопку "Запустить". Или нажать на кнопку "Отменить", если решили не запускать робота.
Описание окна "Запуск робота"
Название кнопки/поля | Описание |
---|---|
Название робота | Название робота, одна из версий которого будет запущена |
Поле "Версия" | Выпадающий список, в котором отображаются все версии робота, которые были опубликованы в базу Оркестратора Рядом с версией есть индикатор, отображающий необходимость наличия графического интерфейса на учетной записи машины для работы этой версии робота. Если отображается , значит, графический интерфейс нужен, если не нужен |
Поле "Уровень логирования" | Выпадающий список, в котором отображаются возможные варианты уровней логирования процесса, который будет исполнять робот Значение по умолчанию: "Бизнес" Доступные значения:
|
Поле "Машина" | Выпадающий список, в котором отображаются названия и IP-адреса машин, о которых есть данные в базе платформы. При этом отображаются только те машины, к которым у вас настроен доступ (подробнее в разделе Access control) |
Поле "Учетная запись" | Выпадающий список с учетными записями:
Для возможности редактирования текущего поля должна быть выбрана машина в поле "Машина" |
Блок с полями "Настройка входных параметров робота" | Если у выбранной версии робота есть входные параметры, то в окне будет отображаться подраздел "Настройка входных параметров робота" с полями для заполнения этих параметров:
Количество полей равно количеству входных переменных, указанных в роботе. Название каждого такого поля соответствует названию переменных. Рядом с полем есть подсказка о типе данных поля Если в роботе есть параметры с каким-либо другим типом данных, кроме этих 3-х, то они не будут отображены Наличие предупреждения не мешает запуску робота или отображению полей с типом "Строка", "Число" и/или "Логический" |
Кнопка "Отменить" | При нажатии появляется окно с подтверждением отмены запуска: | Кнопка "Запустить" | Если все обязательные поля заполнены, то при нажатии начинается процесс запуска робота