История страницы
The "Object groups" section is intended for viewing, creating and modifying object groups.
The section provides a separate tab for each type of object groups (hosts, robots, etc.).
One object can be in only one place: either in a group or in the tenant itself (see the "Tenant objects" section). And you cannot add the same object to several groups at once, it can only be in one group.
"Hosts" tab
The tab is available:
- Creating a new host group using the "Create host group" button
- Viewing the list of created host groups
- Viewing the card of a host group by clicking on the group name
- Deleting a host group by clicking on the "Delete" button
Description of host group table
Column name / button name | Description |
---|---|
"Group" column | Name of the host group. |
Description | Description of the host group. |
"Delete group" button | Button for deleting a host group. If you press this button, a window appears to confirm the deletion of the group. You cannot delete a machine group until all hosts have been deleted from it. |
Creating a host group
- To add a host group, follow the steps:
2. Enter the group name and description in the appropriate fields. The name must be unique.
3. Click the "Create" button to confirm the group creation. Or click the "Cancel" button if you decide not to create a group.
4. When you click on "Create", the window will be closed and the host group will be added to the table.
Group card, "Hosts" tab
In the card, the Host tab allows you to:
- Viewing the list of hosts added to this group,
- Adding a host to the group,
- Deleting a host from the group.
Description of the hosts table
The table contains the list of host accounts (server or personal computer) that are added to the group.
Column name / button name | Description |
---|---|
"Host" column | Name of the host and its IP address. |
"Account" column | The name of the host account. |
"Delete from group" button | Button for deleting a host account from a group. If you press this button, a window appears to confirm the deletion: Once deleted from a group, the account will be moved to the current tenant, and will be available to all users of that tenant. |
Adding a host to a group
To add a host account to a group, follow the steps:
- Click on the "Add host" button. The " Add host to group" window will open:
- From the Machine dropdown list, select the host whose account you want to add to the group. The list only shows hosts that still have accounts without a group; however, these accounts have already been added to the current tenant.
- In the Account dropdown list, select the host account. Only accounts that have been added to the current tenant, but are not in the host groups, will be displayed in the list.
Click on the "Add" button to confirm the selection. Or click on the "Cancel" button if you decide not to add the host to the group.
When you click on "Add", the window will be closed and the selected host account(s) will be added to the group.
You can also click on the "Add and select next" button if you want to add the account(s) of the selected host, and continue adding accounts for other hosts.
Group card, "Parameters" tab
The tab is intended for viewing and editing the group parameters - its name and description.
To change the parameters of the group you should perform the steps:
- Click on the "Edit" button. After pressing it all fields will become editable:
Make the necessary adjustments.
Click on the "Save" button to confirm the changes made. Or click the "Cancel" button if you decide not to apply the changes. In any case, the tab of the group card will be switched to the reading mode again.
"Robot projects" tab
The tab is available for:
- Creating a new robot project group by clicking the "Create robot project group" button,
- View Viewing the list of created robot project groups,
- View Viewing the robot project group card by clicking on the group name.
- Delete Deleting a robot project group by clicking on the "Delete" button.
Description of the table of robot project groups
The table contains a list of robot project groups, the data about which have been added to the platform database.
Column name/button name | Description |
---|---|
"Group" column | The name of the robot project group. |
"Description" column | The name description of the robot project group. |
"Delete group" button | Button for deleting a robot project group. When you click this button, a window appears to confirm the deletion of the group. You cannot delete a robot project group until all robot projects have been deleted from it |
Creating a group of robot projects
To add a group of robot projects, you need to follow the steps:
- Click on the "Create robot projects group" button. The "Create robot projects group" window opens:
Enter the group name and description in the appropriate fields. The name must be unique.
Click the "Create" button to confirm the group creation. Or click the "Cancel" button if you decide not to create the group.
When you click on "Create", the window will be closed and the robot project group will be added to the table.
Group card, "Robot projects" tab
In the card , on the "Robot projects" tab is are available:
- View Viewing the tab,
- Adding a robot project to a group,
- Deleting a robot project from a group.
Description of the table of robot projects
The table contains a list of robot projects, their description and properties.
Column name/button name | Description |
---|---|
"Robot project" column | The name of the robot project. |
"Robot description" button | When clicked, a modal window opens with the name of the robot project and its description. |
"Version" column | The version of the robot project. Next to the version, there is an indicator that shows whether the host account needs a GUI to run this version of the robot project. If it is displayed |
"Delete from group" button | Button for deleting a robot project from a group of robot projects. If you click this button, a window appears to confirm the deletion of the robot project. After deletion from a group, the robot project will be moved to the current tenant, and will be available to all users of that tenant. |
Adding a robot project to a group
To add a robot project to a group, follow the steps:
- Click on the "Add robot project" button: The "Add robot project to group" window opens:
- In the Robot project dropdown drop-down list, select the project that you want to add to the group. In this case, the list shows only those projects that are published in the current tenant, but they are not in the robot project groups.
Click the "Add" button to confirm the selection. Or click on the "Cancel" button if you decide not to add the project to the group.
When you click on "Add", the window will be closed and the selected project(s) will be added to the group. All versions of the selected robot project will be moved to the group.
Group card, "Parameters" tab
The tab is intended for viewing and editing the group parameters - its name and description.
To change the parameters of the group you should perform the steps:
- Click on the "Edit" button. After pressing it all fields will become editable:
Make the necessary adjustments.
Click on the "Save" button to confirm the changes made. Or click the "Cancel" button if you decide not to apply the changes. In any case, the tab of the group card will be switched to the reading mode again.
"Robots" tab
The tab is available for:
- Creating a new robot group by clicking the "Create robot group" button
- Viewing the list of created robot groups
- View Viewing the robot group card by clicking on the group name
- Deleting a robot group by clicking on the "Delete" button
Description of the robot group table
The table contains a list of robot groups whose data has been added to the platform database.
Column name/button name | Description |
---|---|
"Group" column | Name The name of the robot group. |
"Description" column | Description The description of the robot group. |
"Delete group" button | The button to delete a group of robots. If you click this button, a window appears to confirm the deletion of the group. You cannot delete a robot group until all robots have been deleted from it |
Creating a group of robots
To add a robot group, you need to follow the steps:
- Click on the "Create a robot group" button. The "Create robot group" window opens:
2. Enter the group name and description in the appropriate fields. The name must be unique.
3. Click the "Create" button to confirm the group creation. Or click the "Cancel" button if you decide not to create a group.
4. When you click on "Create", the window will be closed and the robot group will be added to the table.
Group card, "Robots" tab
In the card, the Robots tab allows you to:
- Viewing the tab,
- Adding a robot to a group,
- Deleting a robot from a group.
Description of the robot table
The table contains a list of robots, their descriptions and properties.
Column name/button name | Description |
---|---|
"Robot" column | Name of the robot. |
A modal window with the name of the robot and its description is opened as soon as you click on it. | |
Столбец "ВерсияVersion" | Версия робота. Если у робота несколько версий, то каждая из них расположена на отдельной строке в таблице. При этом все версии всегда отображаются в порядке их публикации - от самой новой (сверху) к самой старой (внизу). Список версий можно сворачивать или разворачивать по кнопке или . Если у робота только одна версия, то эта кнопка отсутствует. Рядом с версией есть индикатор, отображающий необходимость наличия графического интерфейса на учетной записи машины для работы этой версии робота. Если отображается , значит графический интерфейс нужен; если не нужен. |
Кнопка «Удалить из группы» | Кнопка для удаления робота из группы роботов. При нажатии появляется окно с подтверждением удаления робота. После удаления из группы робот будет перенесен в текущий тенант, и будет доступен всем пользователям этого тенанта. |
Добавление робота в группу
Для добавления группы роботов необходимо выполнить шаги:
...
Нажать на кнопку «Добавить» для подтверждения выбора. Или нажать на кнопку "Отменить", если решили не добавлять робота в группу.
...
При нажатии на "Добавить", окно будет закрыто, а выбранные робот(ы) будут добавлены в группу. В группу будут перенесены все версии выбранного робота.
Карточка группы, вкладка "Параметры"
Вкладка предназначена для просмотра и редактирования параметров группы - ее названия и описания.
Для изменения параметров группы необходимо выполнить шаги:
...
Внести необходимые корректировки.
...
Нажать на кнопку «Сохранить» для подтверждения внесенных изменений. Или нажать на кнопку "Отменить", если решили не применять изменения. В любом случае, вкладка карточки группы будет снова переведена в режим чтения.
Вкладка "Процессы"
На вкладке доступны:
- Создание новой группы процессов по кнопке "Создать группу процессов",
- Просмотр списка созданных групп процессов,
- Просмотр карточки группы процессов по нажатию на название группы.
- Удаление группы процессов по кнопке "Удалить".
Описание таблицы групп процессов
Таблица содержит список групп процессов, данные о которых добавлены в базу платформы.
...
Название столбца\кнопки
...
Описание
...
Кнопка «Удалить группу»
...
Кнопка для удаления группы процессов. При нажатии появляется окно с подтверждением удаления группы.
Нельзя удалить группу процессов, пока из нее не будут удалены все процессов.
Создание группы процессов
Для добавления группы процессов необходимо выполнить шаги:
...
Вписать название группы и описание в соответствующие поля. Название должно быть уникальным.
...
Нажать на кнопку «Создать» для подтверждения создания группы. Или нажать на кнопку "Отменить", если решили не создавать группу.
...
При нажатии на "Создать", окно будет закрыто, а группа процессов будет добавлена в таблицу.
Карточка группы, вкладка "Процессы"
В карточке на вкладке "Процессы" доступны:
- Просмотр вкладки,
- Добавление процесса в группу,
- Удаление процесса из группы.
Описание таблицы процессов
Таблица содержит список процессов, их описание и свойства.
...
Название столбца\кнопки
...
Описание
...
column | The version of the robot. Next to the version, there is an indicator that shows whether the host account needs a GUI to run this version of the robot. If it |
"Remove from group" button | Button to remove a robot from a group of robots. If you press this button, a window appears to confirm the deletion of the robot. After deletion from a group, the robot will be moved to the current tenant, and will be available to all users of that tenant. |
Adding a robot to a group
To add a group of robots, follow the steps:
- Click on the "Add a robot" button. The "Add robot to group" window will open:
- In the "Robot" drop-down list, select the robot you want to add to the group. Only those robots that are published in the current tenant but are not in the robot groups are displayed in the list.
Click the "Add" button to confirm your selection. Or click on the "Cancel" button if you decide not to add the robot to the group.
When you click the "Add", the window will be closed and the selected robot(s) will be added to the group. All versions of the selected robot(s) will be moved to the group.
Group card, "Parameters" tab
The tab is intended for viewing and editing parameters of the group - its name and description.
To change the parameters of the group, follow the steps:
- Click on the "Edit" button. After pressing it all fields will become editable:
Make the necessary adjustments.
Click on the "Save" button to confirm the changes made. Or click the "Cancel" button if you decide not to apply the changes. In any case, the tab of the group card will be switched back to the reading mode.
"Processes" tab
The tab is available for:
- Creating a new process group by clicking the "Create Process Group" button
- Viewing the list of created process groups
- Viewing the process group card by clicking on the group name
- Deleting a process group by pressing the "Delete" button
Description of the process groups table
The table contains the list of process groups, the data about which are added to the platform database.
Column name/button name | Description |
---|---|
"Group" column | The name of the process group. |
"Description" column | The description of the process group. |
"Delete group" button | The button for deleting a group of processes. If you press this button, a window appears to confirm the deletion of the group. You cannot delete a process group until all processes have been deleted from it. |
Creating a process group
To add a process group you should follow the steps:
- Click on the "Create process group" button. The "Create process group" window will open:
Enter the group name and description in the appropriate fields. The name must be unique.
Click the "Create" button to confirm the group creation. Or click on the "Cancel" button if you decide not to create the group.
When you click on "Create", the window will be closed and the process group will be added to the table.
Group card, "Processes" tab
In the card, the Processes tab allows you:
- Viewing the tab
- Adding a process to a group
- Deleting a process from a group
Description of the processes table
The table contains the list of processes, their description and properties.
Column name/button name | Description |
---|---|
"Process" column | The name of the process. |
"Version" column | The version of the process. If a process has several versions, each of them is located on a separate row in the table. All versions are always displayed in the order of their publication - from the newest (top) to the oldest (bottom). The list of versions can be collapsed or expanded using the or |
"Delete from group" button | This button is used to delete a process from a process group. If you press this button, a confirmation window appears to confirm the deletion of the process. After deletion from the group, the process will be moved to the current tenant and will be available to all users of that tenant. |
Adding a process to a group
To add a process group, follow the steps:
- Click on the "Add process" button. The "Add process to group" window will open:
- In the drop-down list in the Process field, select the process to be added to the group. Only those processes that are added to the current tenant but are not in the process groups are displayed in the list.
Click the "Add" button to confirm the selection. Or click on the "Cancel" button if you decide not to add the process to the group.
When you click on "Add", the window will be closed and the selected process(es) will be added to the group. All versions of the selected process will be moved to the group.
Group card, "Parameters" tab
The tab is intended for viewing and editing the parameters of the group - its name and description.
To change the parameters of a group, you should perform the following steps:
- Click on the "Edit" button. After pressing it, all fields will become editable:
Make the necessary adjustments.
Click on the "Save" button to confirm the changes made. Or click the "Cancel" button if you decide not to apply the changes. In any case, the tab of the group card will be switched to the reading mode again.
"Screen forms" tab
The tab is available for:
- Creating a new group of screen forms by clicking the "Create a group of screen forms" button
- Viewing the list of created groups of screen forms
- Viewing the card of a group of screen forms by clicking on the group name
- Deleting a group of screen forms by pressing the "Delete" button
Description of the table of screen forms groups
The table contains the list of groups of screen forms, the data about which are added to the platform database.
Column name/button name | Description |
---|---|
"Group" column | Name of the group of screen forms. |
"Description" column | Description of the group of screen forms. |
"Delete group" button | The button for deleting a group of screen forms. When you click this button, a window appears to confirm the deletion of the group. You cannot delete a group of screen forms until all screen forms have been deleted from it. |
Creating a group of screen forms
To add a group of screen forms you should follow the steps:
- Click on the "Create screen forms group" button. The "Create screen forms group" window will open:
Enter the group name and description in the appropriate fields. The name must be unique.
Click the "Create" button to confirm the group creation. Or click the "Cancel" button if you decide not to create the group.
If you click on "Create", the window will be closed and the group will be added to the table.
Group card, "Screen forms" tab
In the card, the "Screen Forms" tab is available for:
- Viewing the tab
- Adding a screen form to a group
- Deleting a screen form from a group
Description of the table of screen forms
The table contains the list of screen forms, their description and properties.
Column name/button name | Description |
---|---|
"Screen form" column | Name of the screen form. |
"Version" column | If a screen form has several versions, each of them is located on a separate row in the table. All versions are always displayed in the order of their publication - from the newest (top) to the oldest (bottom). The list of versions can be minimized or expanded using the or |
"Delete from group" button | The button for deleting a screen form from a group. When you press this button, a window appears with confirmation of the deletion of the SF. Once deleted from a group, the screen form will be moved to the current tenant, and will be available to all users of that tenant. |
Adding a screen form to a group
To add a screen form to a group of screen forms, follow the steps:
- Click on the "Add a screen form" button. The "Add screen form to group" window opens:
- In the drop-down list in the "Screen form" field, select the SF you want to add to the group. In this case, the list displays only those screen forms that are published in the current tenant, but they are not in the groups of screen forms.
Click the "Add" button to confirm your selection. Or click on the "Cancel" button if you decide not to add the screen form to the group.
When you click on "Add", the window will be closed and the selected SFs will be added to the group. All versions of the selected screen form will be transferred to the group.
Group card, "Parameters" tab
The tab is intended for viewing and editing the parameters of the group - its name and description.
To change the group parameters, you should perform the following steps:
- Click on the "Edit" button. After pressing it, all fields will become editable:
Make the necessary adjustments.
Click on the "Save" button to confirm the changes made. Or click the "Cancel" button if you decide not to apply the changes. In any case, the tab of the group card will be switched to the reading mode again
...
Версия процесса.
Если у процесса несколько версий, то каждая из них расположена на отдельной строке в таблице. При этом все версии всегда отображаются в порядке их публикации - от самой новой (сверху) к самой старой (внизу). Список версий можно сворачивать или разворачивать по кнопке или . Если у процесса только одна версия, то эта кнопка отсутствует.
...
Кнопка «Удалить из группы»
...
Кнопка для удаления процесса из группы процессов. При нажатии появляется окно с подтверждением удаления процесса.
После удаления из группы процесс будет перенесен в текущий тенант, и будет доступен всем пользователям этого тенанта.
Добавление процесса в группу
Для добавления группы процессов необходимо выполнить шаги:
...
Нажать на кнопку «Добавить» для подтверждения выбора. Или нажать на кнопку "Отменить", если решили не добавлять процесс в группу.
...
При нажатии на "Добавить", окно будет закрыто, а выбранные процесс(ы) будут добавлены в группу. В группу будут перенесены все версии выбранного процесса.
Карточка группы, вкладка "Параметры"
Вкладка предназначена для просмотра и редактирования параметров группы - ее названия и описания.
Для изменения параметров группы необходимо выполнить шаги:
...
Внести необходимые корректировки.
...
Нажать на кнопку «Сохранить» для подтверждения внесенных изменений. Или нажать на кнопку "Отменить", если решили не применять изменения. В любом случае, вкладка карточки группы будет снова переведена в режим чтения.
Вкладка "Экранные формы"
На вкладке доступны:
- Создание новой группы экранных форм по кнопке "Создать группу экранных форм",
- Просмотр списка созданных групп экранных форм,
- Просмотр карточки группы экранных форм по нажатию на название группы.
- Удаление группы экранных форм по кнопке "Удалить".
Описание таблицы групп экранных форм
Таблица содержит список групп экранных форм, данные о которых добавлены в базу платформы.
...
Название столбца\кнопки
...
Описание
...
Кнопка «Удалить группу»
...
Кнопка для удаления группы экранных форм. При нажатии появляется окно с подтверждением удаления группы.
Нельзя удалить группу экранных форм, пока из нее не будут удалены все экранные формы.
Создание группы экранных форм
Для добавления группы экранных форм необходимо выполнить шаги:
...
Вписать название группы и описание в соответствующие поля. Название должно быть уникальным.
...
Нажать на кнопку «Создать» для подтверждения создания группы. Или нажать на кнопку "Отменить", если решили не создавать группу.
...
При нажатии на "Создать", окно будет закрыто, а группа экранных форм будет добавлена в таблицу.
Карточка группы, вкладка "Экранные формы"
В карточке на вкладке "Экранные формы" доступны:
- Просмотр вкладки,
- Добавление экранной формы в группу,
- Удаление экранной формы из группы.
Описание таблицы экранных форм
Таблица содержит список экранных форм, их описание и свойства.
...
Название столбца\кнопки
...
Описание
...
Версия экранной формы.
Если у экранной формы несколько версий, то каждая из них расположена на отдельной строке в таблице. При этом все версии всегда отображаются в порядке их публикации - от самой новой (сверху) к самой старой (внизу). Список версий можно сворачивать или разворачивать по кнопке или . Если у экранной формы только одна версия, то эта кнопка отсутствует.
...
Кнопка «Удалить из группы»
...
Кнопка для удаления экранной формы из группы. При нажатии появляется окно с подтверждением удаления ЭФ.
После удаления из группы экранная форма будет перенесена в текущий тенант, и будет доступна всем пользователям этого тенанта.
Добавление экранной формы в группу
Для добавления экранной формы в группу экранных форм необходимо выполнить шаги:
...
Нажать на кнопку «Добавить» для подтверждения выбора. Или нажать на кнопку "Отменить", если решили не добавлять экранную форму в группу.
...
При нажатии на "Добавить", окно будет закрыто, а выбранные ЭФ будут добавлены в группу. В группу будут перенесены все версии выбранной экранной формы.
Карточка группы, вкладка "Параметры"
Вкладка предназначена для просмотра и редактирования параметров группы - ее названия и описания.
Для изменения параметров группы необходимо выполнить шаги:
- Нажать на кнопку "Редактировать". После нажатия все поля станут редактируемыми:
Внести необходимые корректировки.
Нажать на кнопку «Сохранить» для подтверждения внесенных изменений. Или нажать на кнопку "Отменить", если решили не применять изменения. В любом случае, вкладка карточки группы будет снова переведена в режим чтения.