To unpin the "Log" tab panel, left-click on the required tab and pull it to the workspace, the tab will be unpinned and located on the workspace.

Further, the "Log" tab can be placed on four sides of the working field with the scheme. To do this, pull the tab with the left mouse button to the selected side of the navigation bar located in the center:

After the blue area appears, release the left mouse button. The "Log" tab will be fixed on the selected side of the working field with the scheme:

In the same way, you can place the "Log" tab on the edges of the studio.

To do this, the free-floating "Log" tab should be pulled with the left mouse button to the selected side of the navigation bar along the edges of the Studio:

After the blue area appears, release the left mouse button. The "Log" tab will be fixed at the selected edge of the Studio:

The "Log" tab can also be fixed next to the "Robot scheme" tab.

To do this, right-click on the floating tab "Log" and select the value "Tabbed document".

To return the window with logs it is necessary to right-click on the corresponding tab and select the value "Floating".

The "Log" tab can also be attached next to any tab in ROBIN Studio.

To do this, the free-floating "Log" tab should be left-clicked to the selected tab until a blue rectangle appears:

And then release the mouse button. The "Log" tab will be fixed near the desired tab in ROBIN Studio.

  • Нет меток