If it is necessary to run the robot in automatic mode, according to a schedule, you will need to set up a schedule for running the robot. To view and configure the local robot launch schedule, select the desired robot and click "Schedule settings".

The "Launch schedule" tab allows the user to view the local robot schedule settings.

  • To add a new schedule for starting the robot, click  
  • To disable the schedule, you need to move the slider  
  • To edit the schedule, click 
  • To delete a schedule, click  
  • To update the changes you have made, click  
  • To launch the Windows task scheduler, click   

When editing a schedule, a window opens:

In the window, the user can edit the robot's launch schedule, restart schedule, and launch frequency.

To activate the settings sections, move the corresponding slider to the state "Enabled", configure the necessary parameters. To finish, click "Refresh".

Description of the schedule settings sections

The "Run" section

It is intended for setting the date and time of the robot launch. To configure the option "Run" (date and time of launch), you need to click on the button, and then use the "Calendar" to select the date and time of the robot launch.

The "Restart" section

Designed to adjust the interval and the number of repeated restarts of the robot. To configure the option "Restart" it is necessary to switch the switch to the "On" mode, set the repetition interval, if necessary, switch the "Repeat during" switch to the "On" mode and set the number of repetitions in the time interval.

The "Frequency" section

It is designed to adjust the frequency of the robot launch (weekly, monthly, daily). To configure the option "Frequency", you need to switch the switch to "On" mode, and then select the launch frequency – daily, weekly (then you need to select the day of the week) or monthly (then you need to select the day of the month).

The "Run before" section

It is intended for setting the date and time before which the robot needs to be launched. To configure the option "Run before" it is necessary to switch the switch to the "On" mode, and then click on the calendar button and set the date and time before which you need to start the robot.

The "Additional" section

The section settings are used to select a rule when performing a task. The functionality for choosing a rule is similar to this functionality in the task scheduler. Rules are available:

  • Do not start a new instance
  • Launch a new instance
  • Put a new instance of the task in the queue
  • Stopping the current task

By default, the value is set to "Don’t start a new instance".

Section "Run Parameters"

It is intended for setting the logging level and specifying input data for the robot, if they are required for its operation.

Logging involves the possibility of setting several levels, which allows you to vary the amount stored in the logs.

The requirement to install input data can be set in the Technical Specification for the configuration and implementation of this software robot. If so, follow these requirements, enter the data in the "Data" window before starting the robot.

To update the robot launch schedule, click on the "Refresh" button, to cancel the created schedule, click on the "Cancel" button.

The robot will be launched according to the schedule.

  • Нет меток